Homepage  |  Latest PC Cheats  |  Cheatbook  |  Games Index  |  Links  |  Contact  |  Download  |  Search
Browse By PC Games Index:   A  B  C  D  E  F  G  H  I  J  K  L  M  N  O  P  Q  R  S  T  U  V  W  X  Y  Z  #

Satisfactory Cheats


Cheat Codes:
Submitted by: David K.

Useful Tips and Tricks:
Written by Verios44

Here you can find some useful general tips for beginners and 
expierenced players.

* Take your time. Do not rush progress. Learn how the different production 
  processes work. Late game production can be quite complex.
* Build up! Take advantage that you can build vertically.
* From sea level, you can build appx 800m up before hitting the death ceiling.
  You can also build appx 200m down into the void.
* The void is the common name for the endless pit you see on the edges of the 
  map, and a few areas in the middle.
* Your bottlenecks in the game are belts and pipes.
* Belts are rated by items moved per minute, 
  the tiers are 60 / 120 / 270 / 480 / 780 items per minute.
* Pipes have a maximum flow rate of 300m3 a minute. 
  There are no higher tiers at this time.
* Pipes are effected by gravity. 
  A machine such as a water extractor has a 10m headlift.
* Headlift is how much a machine can push liquids vertically.
* Pumps can be used to help with headlift. 
  A single pump can add 20m headlift.
* Pumps also act as one-way valves.
* If you route your pipes downhill, you can get around headlift altogether 
  up to where the pipe begins to go downhill.
* The simplest way to construct chains of machines is by use of the manifold 
* A manifold is a set of machines in a single, straight line. With the use of 
  splitters, mergers, or pipe junctions, simply take one belt or pipe and branch 
  it off in series. The only downside is that it can take a while for the system 
  to become 100% efficient. This is because each machine in the line needs to 
  fill its internal storage. This system is also commonly known as overflow. 
  This allows easy expansion.
* Overflow splitter mode, found in smart and programmable splitters can be used 
  to siphon off excess resources to another production chain, or an AWESOME Sink.
* You can also balance your factories using a more traditional balancer, the only
  downside is that you have to figure out the balance ratio and it can use more 
  room. Its also hard to expand.
* Exploration is quite important. You will want to find crash sites and power 
* Crash sites give you a hard drive. In your M.A.M, you can research that hard 
  drive an discover an alternate recipe. You get 3 random choices per hard drove 
  and you may select one at once. There are currently more hard drives on the 
  map than alternate recipes.
* Power slugs can be processed into power shards, which allow you to overclock 
  your buildings.
* Do not be afraid to dismantle and try again!

Console Commands:
To enable the console use, you will need to press CTRL+SHIFT+L keys simultaneously 
in-game. The game will not indicate any changes once you’ve done that. Afterwards, 
you can use the “~” (Tilde) key to open the console command line. Pressing it twice 
will result in the window becoming larger, which is required for some commands. 
Here is a list of commands you’re likely to find useful:

Gamma [number]
- Changes gamma (brightness) level.

materialFlowAnalysis recipeName[FString] 
- Finds the items required per second for all craftable items. 
Requires large console command line window.

Pause - Pauses the game.

r.Atmosphere [either 0 or 1] 
- Activates or deactivates the atmosphere.

r.Fog [either 0 or 1] 
- Activates or deactivates the fog.

- Sets the render distance of things like foliage, rocks and trees.

r.ScreenPercentage [percent] 
- Sets internal resolution scale.

r.TemporalAACurrentFrameWeight [number between 0-1] 
- Sets the impact of the current internal frame to the final image.

- Sets the spread of the TAA samples. Values below 1 sharpen the image. 
Only shows results when r.TemporalAASamples has a value greater than 6.

r.TemporalAASamples [number] 
- Sets the number of samples to use for TAA. (Def 8)

r.Tonemapper.Sharpen [number] 
- Sets the amount of a simple sharpen filter. (Def 0)

Stat Unit 
— Shows information about various graphic statistics

— Kills the player

Stat FPS 
— Shows a FPS counter

Stat Levels 
— Displays level streaming info

t.MaxFPS [value] 
— Sets maximum framerate (Set the value to 0 for unlimited) 
(Default is 0)

FOV [value] 
— Sets Field of View. (Values higher than 150 are not recommended)

ShowDebug [DebugType] 
— Using this command with any DebugType will display player’s name, coordinates 
in the world, owner, base eye height, rotation and instigator, as well as bonus 
information, depending on what DebugType you have used.

- Use unknown. Presumably shows information regarding enemies and/or automated 
vehicles near the player.

- Shows number of active audio sources + other information. Execute again to show 
default information.

- Use unknown. Presumably shows information regarding what frame of an animation 
is being played, the name of the animation, etc.

- Use unknown. Presumably shows information regarding bone connections and their 
orientation in non-static models.

- Shows extra information about the camera position underneath default information.

- Shows information regarding any power networks (circuits) in the world including;
 number of circuits, ID(s) and information about the circuits including; components, 
power produced, power consumed and fuse status. 
Execute again to show default information.

- Unknown. Presumably shows collision information.

- Shows number of player built structures (not including vehicles) in order from 
most to least.

- Use Unknown. Notes: Causes extreme lag, use at own risk. 
Execute again to show default information.

- Shows information about current force feedback values and what is contributing 
to that calculation underneath default information.

- Shows information about which input method is currently being used (keyboard/mouse) 
which key is being used, the input value of the input and the time the input has been 
executed. Also shows information pertaining to input stack. 
All of this information is shown underneath the default information.

- Use unknown. Presumably used to show multiplayer connection info.

- Shows only default information, hiding the rest.

- Shows information about; Current player velocity components, total player speed, 
total player speed (2D), acceleration experienced by the player and other physics 
related information. This is all shown underneath default information.

- Use unknown. Note: Causes Lag, use at your own risk.

- Shows information related to the radioactivity subsystem including; Number of 
radiation sources, emitters and levels of radiation emitted and player exposure level. 
Execute again to show default information.

- Presumably shows spheres where radiation would begin to affect the player. 
Execute again to show default information.

- Hides all debug information, including default information.

- Shows information on the significance of sounds currently being played and 
their volume relative to each other.

- Shows information on the railroad subsystem pertaining to tracks. 
Execute again to show default information.

- Use unknown. Presumably shows information regarding connections between train cars.

- Shows information on the railroad subsystem pertaining to trains. 
Execute again to show default information.

- Shows information on the vehicle the player is currently in including: Speed, 
Steering angle, throttle information, whether or not the brake is on, current gear, 
engine RPM, drag force being experienced and physics information 
about each wheel on the vehicle.

- Use unknown. Presumably shows information regarding held weapons/tools.
Submit your codes!
Having Satisfactory codes, tips and tricks we dont have yet?
Submit them through our form
Visit CheatBook for Satisfactory Cheat Codes, Hints, Walkthroughs or Game Cheats
PC Games, PC Game Cheats, Video Games, Cheat Codes, Cheat, FAQs, Walkthrough
Spotlight: New Version CheatBook DataBase 2022
CheatBook DataBase 2022 is a freeware cheat code tracker that makes hints, tips, tricks and cheats (for PC Cheats, Walkthroughs, PSP, Sega, iPhone, Wii U, Playstation, Playstation 2, XBox, Playstation 3, Nintendo 64, DVD, Gameboy Advance, Gameboy Color, N-Gage, Nintendo DS, gamecube, XBox 360, Dreamcast, Super Nintendo) easily accessible from one central location. (Release date January 08, 2022) - All Cheats and Codes inside from the first CHEATBOOK January 1998 until today. More Infos
© 1998 - 2022 Cheatinfo.de  |  Privacy Policy  |  Links  |  Game Trainers  |  Submit Cheats
Affilates Sites:  Cheatbook  |  Cheatchannel  |  Cheatbook Magazine  |  Photographic-Images  |  Cheat Codes
Top Cheats:   Just Cause 3 Cheats  |  Left 4 Dead 2  |  Call of Duty: Black Ops III Cheats  |  Dead Rising 2  |  Moshi Monsters  |  Far Cry 4 Cheats